06 silverado viper 5900?

Home / the12volt's Install Bay / Car Security and Convenience / 06 silverado viper 5900? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mtrhd329

Member - Posts: 20

Joined: January 26, 2007

Location: United States

Posted: February 05, 2011 at 2:03 PM / IP Logged

I have a 06 Silverado w/t model in which i installed a viper 5900 remote start. The alarm functions well and the vehicle starts with the key just fine but when i try and remote start it, the vehicle cranks and fires but does not stay running. It fires for just a second and then quits. I double checked the tach wire and programmed the tach signal but this is frustrating. anyone have any ideas? does the work truck model have passlock??

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: February 05, 2011 at 3:38 PM / IP Logged

Sure sounds like Passlock2. Check the steering column for a group of 3 thin gauge wires with the following colors coming down from the ignition switch: YELLOW (+), BLACK (-) and RED / WHITE.

Soldering is fun!

mtrhd329

Member - Posts: 20

Joined: January 26, 2007

Location: United States

Posted: February 06, 2011 at 10:48 AM / IP Logged

So the three wires means passlock 2? So whatmodule would I use for that? And it would be passlock 2 for sure not passlock 1? How do I tell the difference?

monty_77

Copper - Posts: 491

Joined: January 15, 2009

Location: North Dakota, United States

Posted: February 06, 2011 at 12:34 PM / IP Logged

That vehicle would be passlock 2. do you have power locks with keyless entry?

if it does i would suggest something like GMDLBP

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: February 09, 2011 at 2:52 PM / IP Logged

all GM trucks from 98-up have PL II...... use the appropriate bypass module.....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

zerepdivad

Silver - Posts: 605

Joined: July 03, 2006

Location: Wisconsin, United States

Posted: February 10, 2011 at 12:20 AM / IP Logged

or 2 relay it and call it a day.

you're lucky it hasn't locked out on ya.

A DMM is a beautiful thing.

MECP Advanced Installer Certified.

mtrhd329

Member - Posts: 20

Joined: January 26, 2007

Location: United States

Posted: February 10, 2011 at 3:36 PM / IP Logged

i have been driving the truck every day i just cant remote start it. cant i just bypass it like the old VATS systems and just put a resistor in line with the passlock wires?

kreg357

Platinum - Posts: 7,783

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: February 10, 2011 at 4:58 PM / IP Logged

Here is a link to the "Relays and resistor" method. http://documents.audiovox.com/700054.pdf Or you could look for a DEI 556LW ( available @ online auction for ~ $23 ).

Soldering is fun!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

06 silverado viper 5900?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.