the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2005 Volvo XC90, Remote Start


Post ReplyPost New Topic
< Prev Topic Next Topic >
sandoggg 
Member - Posts: 10
Member spacespace
Joined: February 05, 2011
Location: California, United States
Posted: March 14, 2011 at 2:41 PM / IP Logged  

I finally got the R/S to work.  Surprisingly, I only have one loop over the ignition cylinder.  Once got it to start, I glued it in place and put back the covers...worked like a champ. I'm happy now except for the SRS light. 

I only have the ground, power and status output hooked up on the TBXKEY.  The keysense was hooked up to IGN2.  One thing though, I tried to add more loops by splicing more copper wire but did not work.  It was bare without the insulation around the loops.  So, I took another antenna loop from my extra TBXKEY and used it...no mods.  It worked?  Hummm?

Does the loop have to be insulated?  You would think bare wires would generate more signal to the immobilizer but I guess not.  I'll insulate this one and use it for my other install...2001 Chrysler Sebring.

Thanks for the help everyone...

disco77
heinstal 
Member - Posts: 34
Member spacespace
Joined: October 09, 2008
Location: Ontario, Canada
Posted: July 22, 2011 at 10:19 AM / IP Logged  

no defintely the wires should be insulated, specially since the the cyclender in metal....makes a big difference.

~~~wael~~~
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer