the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2010 dodge ram radio wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
stang351w 
Silver - Posts: 350
Silver spacespace
Joined: August 20, 2003
Location: Canada
Posted: February 16, 2011 at 8:35 PM / IP Logged  
hello, i've got a customer that wants to keep his factory deck but run a aftermarket sub. i'm looking for the wiring on the deck for the rear speakers (useing a LOC for the RCA's) he doesn't have the full NAV system or 6 disk changer but he does have 6 speakers and it did have a factory sub.  thanks in advance
Tri County KustomZ
certified installer
i am an idiot 
Platinum - Posts: 13,666
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: February 16, 2011 at 9:37 PM / IP Logged  
If it has a factory sub, you will have to get signal from the factory sub.  If it has a factory sub, chances are the door speaker outputs of the radio will be crossed over.  The only speaker that plays bass is the factory sub.
stang351w 
Silver - Posts: 350
Silver spacespace
Joined: August 20, 2003
Location: Canada
Posted: February 17, 2011 at 5:04 AM / IP Logged  
alright thanks. the only problem is when i checked the wires where the factory sub was I used my DMM to find the power and ground (incase the amp was built into the sub box...wasn't sure) but i had 6,3VDC on each of the 4 wires.
Tri County KustomZ
certified installer
i am an idiot 
Platinum - Posts: 13,666
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: February 17, 2011 at 5:55 AM / IP Logged  
Each of those 4 wires were speaker wires.  There is a Dual Voice Coil woofer inside that box.  You will need to remove the woofer to see which wires are positive and negative. 
stang351w 
Silver - Posts: 350
Silver spacespace
Joined: August 20, 2003
Location: Canada
Posted: February 17, 2011 at 8:23 PM / IP Logged  
would like to say thanks for the info..got everything connected and working tonight...the LOC used provided a remote on so that made things go really nice.
Tri County KustomZ
certified installer

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer