the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2001 impala


Post ReplyPost New Topic
< Prev Topic Next Topic >
vincybadman 
Member - Posts: 2
Member spacespace
Joined: January 30, 2006
Location: United States
Posted: April 02, 2011 at 7:34 PM / IP Logged  
i installed a skytek remote start on my friends car.everything works except when i press unlock on the keypad the lights starts flashing until i press lock.......and when i pop the trunk the horn sounds anyone have any ideas what might be causing this  
brcidd 
Copper - Posts: 274
Copper spacespace
Joined: January 07, 2005
Location: Ohio, United States
Posted: April 02, 2011 at 8:26 PM / IP Logged  
Sounds like you are setting off the factory alarm- you should disarm the factory alarm when unlocking, and/or popping trunk.  Use your disarm wire from your R/S unit.
Brcidd - Engineer That Does Remote Starter Installs on the side.
phil6710 
Copper - Posts: 89
Copper spacespace
Joined: September 04, 2009
Location: New York, United States
Posted: April 03, 2011 at 6:31 PM / IP Logged  
What type of bypass did you use?  I have had the same problem when installing a remote starter on that car with an Idatalink bypass. Its an easy fix. It is cause by the software on the bypass unit. It can be reflashed and the problem is solved. 
Solartech Window Tinting and Electronics,contract installer
vincybadman 
Member - Posts: 2
Member spacespace
Joined: January 30, 2006
Location: United States
Posted: April 04, 2011 at 7:22 PM / IP Logged  
It is an idatalink bypass......how do I reflash it is it in the manual?
blanx218 
Silver - Posts: 654
Silver spacespace
Joined: September 23, 2008
Location: Pennsylvania, United States
Posted: April 04, 2011 at 11:37 PM / IP Logged  
you need a specific cable to connect it to your computer to reflash it
phil6710 
Copper - Posts: 89
Copper spacespace
Joined: September 04, 2009
Location: New York, United States
Posted: April 07, 2011 at 9:37 PM / IP Logged  

vincybadman wrote:
It is an idatalink bypass......how do I reflash it is it in the manual?

You don't nesscesarly need to relash it. When the unit is being flashed on the coumputer there is a link that is avalible on idata's website. The link describes this problem and tell you how to reprogram with use of the program button on the bypass. Do a search on idatalink'ssupport forum.

Solartech Window Tinting and Electronics,contract installer

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer