viper 5701 adding another led

Home / the12volt's Install Bay / Car Security and Convenience / viper 5701 adding another led (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Nuffstylez

Copper - Posts: 58

This member has made a donation to the12volt.com. Click here for more info.

Joined: August 21, 2003

Location: United States

Posted: July 19, 2011 at 10:12 PM / IP Logged

Hi, I am trying to wire another DEI blue Led to the one that came with the Viper 5701. But Im having trouble. This alarm has the led built into the antenna with the valet switch too (control center) The wire for the led is a pink wire that is run together with the antenna 4 pin harness but branches out to a single harness which is plugged into another slot on the other side of the brain. I know you have to wire the led's in series but this one confuses me. How do I go about wiring this up. Is the black wire in the antenna harness the ground for the led since the pink wire is the only wire going into the harness, even though it is a 2 pin harness.

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: July 19, 2011 at 10:18 PM / IP Logged

Use a 1000 Ohm resistor in series with the new LED. Connect the resistor to a constant 12 volt source. Connect the other end of the resistor to the LED positive wire. Connect the negative lead of the LED to the Status Output, or Ground out While Armed wire of your alarm. Some of the hands on guys will be able to tell you the color of this wire.

Back to Top

Nuffstylez

Copper - Posts: 58

Joined: August 21, 2003

Location: United States

Posted: July 20, 2011 at 4:44 AM / IP Logged

Hey, thanks for the super quick response i am an idiot. But is there an easier way than that. Or because of that new design dei made (control center) you have to wire it the way you suggested.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5701 adding another led

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.