the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2011 mazda 3 avital 3100


Post ReplyPost New Topic
< Prev Topic Next Topic >
bwhite21 
Member - Posts: 6
Member spacespace
Joined: August 04, 2011
Posted: August 04, 2011 at 7:36 PM / IP Logged  

Rookie installer here, just hoping I can find some help before the install tomorrow. I'll have the lead guy overseeing the install but I'd like a head start on him. Its an Avital 3100 keyless entry alarm. I have all my wiring diagrams and photos. Anything I should be aware of or any tips for a new installer would be great. ( I.E. Which wires will I need from the module, bypasses, diodes, etc.) Thank you in advance.

bwhite21 
Member - Posts: 6
Member spacespace
Joined: August 04, 2011
Posted: August 04, 2011 at 11:03 PM / IP Logged  
Also, if anyone could give me a heads up on what HWires I wont use that would be a bonus
pitoaudiovisual 
Copper - Posts: 388
Copper spacespace
Joined: April 25, 2005
Location: Pennsylvania, United States
Posted: August 05, 2011 at 3:48 PM / IP Logged  

ok H1 is for the killer switch so as u wire up the killer switch the orange goes to the killer switch.

H2 is for the parking lights

H3 not used

H4 is for the dome

H5 is the negative door trigger '

H6,H7, not used

H8 is for ground

H9 not used

H10 is for the siren

H11 is constant

H12 is for power truck release

Confidence is the key to any project!!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 18, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer