viper 5301, gmdlbp, 03 silverado.

Home / the12volt's Install Bay / Car Security and Convenience / viper 5301, gmdlbp, 03 silverado. (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jrock1679

Member - Posts: 3

Joined: September 29, 2011

Posted: September 30, 2011 at 9:03 PM / IP Logged

Hi all, I am having an issue with the keyless entry side of this install. I have the remote start working, but the door lock/unlock is not working. When I press either button on the remote, the parking lights flash, horn chirps, and the viper module clicks. The doors do not lock or unlock. I have the blue and green wires from the GMDLBP connected to the corresponding wires in the 3 pin connector of the Viper module. This is my first install of this type and any suggestions would be greatly appreciated. Thanks in advance.

Back to Top

jrock1679

Member - Posts: 3

Joined: September 29, 2011

Posted: September 30, 2011 at 9:04 PM / IP Logged

BTW, my factory fob still works at locking and unlocking. I'm just having the issue with the viper remotes.

Back to Top

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: September 30, 2011 at 10:01 PM / IP Logged

Did you set the GMDLBP to Platform 4? The factory default is Platform 1. See the lower part of Page 3 ( right side ) of the install guide for instructions.

Soldering is fun!

Back to Top

jrock1679

Member - Posts: 3

Joined: September 29, 2011

Posted: September 30, 2011 at 10:41 PM / IP Logged

I just tried that with the same results. No luck. I reset the module and reprogrammed to platform 4. I still get all the same signals, just no lock or unlock.

Back to Top

Mark Mizenko

Copper - Posts: 460

Joined: October 13, 2004

Location: Pennsylvania, United States

Posted: October 03, 2011 at 2:15 PM / IP Logged

What happens if you pulse the lock and unlock wires right to ground in the vehicle? Does it work then?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5301, gmdlbp, 03 silverado.

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.