need a pro to design slot port box

I have a center console I'm building for a new Escalade. I am not good at box design and could use a hand. Will pay a "Reputable" volter for design prior to delivery, name your price. The box is about 2.0 SQFT if you take into account the sub displacement and the .2 cuft cupholders. Sub is down firing, with port exit down firing as well. Music goals: Strictly SQ. Mostly Hip Hop, but needs to sound good for whatever is played. Tuning HZ is your call. The TI loves to go "Deep". Overexcursion is a concern as well being down firing and due to the nature of this sub(has happened in previous slot box on certain notes). Sub: Titanium Eclipse @ 2 Ohms Amp: MTX Jackhammer 600 RMS Material: 3/4 MDF and 3/4 Polycarb INSIDE DIAMETER DIMENSIONS: Height: 13.75 Width: 12.5 Depth: 24 Sub specs: RE - 3.1 ohm (each VC) FS - 27hz qts - .30 vas - 3.2 ft^2 spl - 89db qes - .32 qms - 5.0 sd - 490 cm^2 xmax - 38mm woofer displacement - .19 ft^2 Front and possibly rear of box are going to be polycarb. I am happy with 3/4 MDF. Final box will have music controller with LED's, and be wrapped in Gator and Leather. Will send designer a youtube link once finished. The front of the box is slightly angled back(14:1 pitch), hence depth measurement was given as average depth.Thump.

go to pwkdesigns.com check him out he does awesome work

I sent him a quote form. Thanks!Thump.