is my sub wired correctly

Home / the12volt's Install Bay / Car Audio / is my sub wired correctly (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

markusisright

Member - Posts: 1

Joined: January 04, 2012

Location: Wisconsin, United States

Posted: January 04, 2012 at 1:18 AM / IP Logged

i have an older rockford p1000.1bd amp and one 10" alpine type r sub it is wired in series is that the right way to have it?

markusisright

Back to Top

afdanw

Copper - Posts: 74

Joined: August 06, 2010

Location: Oklahoma, United States

Posted: January 04, 2012 at 11:10 AM / IP Logged

Doesnt look like it. I assume you have the 4 ohm DVC type R. If that is the case you should have it parralleled. that will give u 500w. series will give you about 125w.

if u have the 2ohm dvc, series will give u 225w, and parrallel will give u 1,000w.

If your cousin is such a good installer, and he will install anything for a 6 pack; why are you talking to me?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

is my sub wired correctly

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.