power door only works with the remote.

Does anyone know about a resettable fuse for cars? Kinda like the once found at home where you can reset it without putting a whole new fuse.

It sounds like it is def. something with the door locks (not the cig lighter). Did you test the white and lt. blue wires before making the connection? You may also have a pinched wire somewhere. I would disconnect the relays from the vehicle and see if the fuse still blows. If so you probably have a pinched wire somewhere (possibly in the door boot) or you have a bad switch. If the locks return to working properly then retest the wires and connect them one at a time to see which one causes the fuse to blow. Also, what relays did you use (dei 451m / separate relays / 5pin vs 4pin). If you used 5 pin relays, make sure the 87a pin of each relay is properly insulated and not grounding out.Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

unhook the 87a terminals from ground. Thats the problemyuk

quiet rural missouri, near KC.

If your system moves you physically and not emotionally, you have wasted your money.

Thank to all that helped me. I was able to solve the issue by removing 87a from ground. Thanks again especially to itsyuk!!!