the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

06 chrysler 300


Post ReplyPost New Topic
< Prev Topic Next Topic >
ziggyb222 
Silver - Posts: 593
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 04, 2004
Location: Maine, United States
Posted: August 05, 2012 at 9:17 PM / IP Logged  
I have a Evo-Chr and a T-harness for the non tip start. Trying to pre-wire everything but need to know if this car has a positive start wire.... Anyone???? Thanks in Advance!!!
kreg357 
Platinum - Posts: 7,619
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: August 05, 2012 at 9:33 PM / IP Logged  

Locate and test this wire ( listed by DEI, ADS & Audiovox )  :

Starter        Pink/Dark Green (+)         @ ignition switch, Black 5 pin plug, Pin 4

Should also have PURPLE / Brown MUX wire.

Soldering is fun!
auto enhancers 
Copper - Posts: 203
Copper spacespace
Joined: April 09, 2012
Location: Indiana, United States
Posted: August 05, 2012 at 10:54 PM / IP Logged  
I haven't used any Fortin modules for a few years but why would that matter if you are using acT harness?
Second you should pull the panels of the dash prior instillation so you know where you will need to route your wires. Also TEST them prior to installation.
jmsounds 
Copper - Posts: 99
Copper spacespace
Joined: June 28, 2007
Location: Maryland, United States
Posted: August 06, 2012 at 1:55 PM / IP Logged  
it all depends on what type of key you have if is blade type you can use the starer wire and also you need to use the ignition wire as well
evochr works great if you have any problems call tech support they will walk you thru it never have any problem with this modules
ziggyb222 
Silver - Posts: 593
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 04, 2004
Location: Maine, United States
Posted: August 07, 2012 at 5:38 AM / IP Logged  
If it is a positive start wire a extra relay is needed on that wire.. Was just pre-planning the install.. I test all wires.. Thanks

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 6, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer