pioneer z2 with toggle switch

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / pioneer z2 with toggle switch (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

truenoracing85

Member - Posts: 2

Joined: May 17, 2010

Location: Michigan, United Kingdom

Posted: September 30, 2012 at 12:37 AM / IP Logged

i want to keep the ebrake fuctional but i want to add a toggle switch so when the wife drives i can bypass it so they can't watch tv please help i have a rocker switch do i need a relay

Back to Top

Search for other posts by truenoracing85

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: September 30, 2012 at 8:14 AM / IP Logged

Cut the green wire between the deck and the parking brake connection. Then connect the 2 wires to the 2 terminals of the rocker switch.

Back to Top

truenoracing85

Member - Posts: 2

Joined: May 17, 2010

Location: Michigan, United Kingdom

Posted: September 30, 2012 at 9:21 AM / IP Logged

can you explain alil better

pioneer z2 with toggle switch - Last Post -- posted image.

Back to Top

i am an idiot

Platinum - Posts: 13,667

Joined: September 21, 2006

Location: Louisiana, United States

Posted: September 30, 2012 at 9:51 AM / IP Logged

When you cut the wire, you will now have 2 ends. Disregard the switch terminal that is labeled ground, this terminal is only for the illumination of the switch. You have 2 other terminals on the switch. Connect one end to one terminal of the switch. Then connect the other end of the wire to the other terminal of the switch.

The green wire goes through the switch to get to the parking brake. If this switch is in the off position, there will be no watching video.

Back to Top

flobee4

Silver - Posts: 585

Joined: January 02, 2004

Location: United States

Posted: September 30, 2012 at 10:43 AM / IP Logged

Sorry guys that won't work, The Z-series by Pioneer not only uses the parking brake wire to allow video to play, but uses VSS and GPS. Even if you ground the Parking brake wire, once you start moving over a certain speed the video will stop being displayed. There is a way to do it, check out the web site www.avic411.com

Back to Top

i am an idiot

Platinum - Posts: 13,667

Joined: September 21, 2006

Location: Louisiana, United States

Posted: September 30, 2012 at 12:15 PM / IP Logged

Read the original post again.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

pioneer z2 with toggle switch

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.