the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper 5704 / 2004 mountaineer


Post ReplyPost New Topic
< Prev Topic Next Topic >
vinchinzo 
Copper - Posts: 66
Copper spacespace
Joined: October 11, 2012
Location: Kentucky, United States
Posted: October 23, 2012 at 3:42 PM / IP Logged  
My pictorial =) 2004 Mountaineer/explorer pictorial
When in doubt....kick it!
vinchinzo 
Copper - Posts: 66
Copper spacespace
Joined: October 11, 2012
Location: Kentucky, United States
Posted: October 24, 2012 at 5:35 PM / IP Logged  
Just took out the glass break sensor and installed the dual stage motion and everything is working perfect now! I am so stoked! I think i may have to add a rear shock sensor my SUV is a little big and the sensitivity isn't as good in the rear as it is the front. But I'm ok with it the way it is right now. I did leave the y cable and taped up the end that was running to the glass break just incase I have to add another sensor one day. =) All in all It perfect so far!
When in doubt....kick it!
hudbadoauta 
Member - Posts: 2
Member spacespace
Joined: June 25, 2013
Location: Czechoslovakia
Posted: June 25, 2013 at 2:09 PM / IP Logged  
.
.
.
H2/23 VIOLET/WHITE TACHOMETER INPUT--------------any wire that is not WHITE/ lt. blue (ignition coil)
.
.
Hello,
I´m sorry that I´m asking question right here, but I´m absolutely helpless with my instalation. I´m doing the diesel engine and I can´t figure out how to set the violet/white cable with engine. My thought is to set the cable with contact D+ on alternator, but I´m not sure if this will work out. Any idea please?
hudbadoauta 
Member - Posts: 2
Member spacespace
Joined: June 25, 2013
Location: Czechoslovakia
Posted: June 25, 2013 at 2:10 PM / IP Logged  
the vehicle is: Land Rover Classic, year 1992, diesel engine, manual transmition
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: June 25, 2013 at 2:55 PM / IP Logged  
Get a DEI 464 inductive tach. Blimey, I did a 70s L/Rover recently the guy wanted central locking, Ha Ha I ran a mile.
BTW on yours, everything you want revolves around the instrument binnacle.
Page of 7

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer