08 altima, autostart as 2381tw fm

Sorry, can't help with programming your AutoStart system, not one of my usual brands.

The "How to Identify Vehicle Year" info/chart on Page 15 of the install guide is in all the install

guides.  They ( iDatalink ) just include as a referrence to make things easier for the installer.As long as you followed the Type 1 install and the wires matched up with the '07-'08 Altima chart, you should be good to go.

Soldering is fun!

Anybody out there familiar with AutoStart remotes? I can't get the R/S (as-2381) to enter programming mode to setup function options."Good judgment comes from experience. Experience comes from poor judgment."

-unknown

I guess this question is for KPierson. I hooked up the R/S arm wire to the re-arm wire in the main door switch. When I press and hold lock on the transmitter, the door locks, but the windows don't close. Am I missing something?"Good judgment comes from experience. Experience comes from poor judgment."

-unknown

I can't remote start my 08 Altima PTS. Decided to check all wires with a DMM during remote start.  All wires show activity/voltage spike during a remote start except for Brake Status (2V DC steady) and ignition output (0v).What could be the problem?

Hardware: Autostart as-2381 & ADS AL CA

w2w, VTS, bypass is flashed for latest firmware

"Good judgment comes from experience. Experience comes from poor judgment."

-unknown

Weird problem I have: the bypass programs correctly, but when I try a remote start the dashboard's info display shows no key. Anybody have an idea what might be the cause? Also, what is the correct procedure to program the bypass? Heard different opinions on that. Some say to use the fob but without the key and battery. Others say to connect GWR and brake status after programming. I tried all of that as well as using the fob with key and battery. Didn't make a difference. What is the correct for an ads bypass? Thanks"Good judgment comes from experience. Experience comes from poor judgment."

-unknown