avic z2 in jeep srt8

Hello 12volt, im new to this site hope someone can help me out. Im installing a pioneer avic-z2 in a 2006 jeep grand cherokee srt8. I need to find a speed signal input and a reverse gear signal input. I have no idea where to find a speed signal wire and I cant find any wire diagrams for this jeep on google. Im hoping these wont be too difficult to locate. Any tips would be greatly appreciated! Thanks All

Speed Sense	dk. GREEN/ brown	ac	PCM, BLACK/ green plug, pin 32
The PCM (Powertrain Control Module) is under the hood on the passenger side fender.

Reverse Light	WHITE/ lt. green	+	IPM , conn. 2, pin 2
The IPM (Integrated Power Module) is on the driver fender, behind the battery.

Mike M2

Tech Manager

CS Dealer Services

great thanks a lot !

On the pcm there are 3 plugs.. Any idea which plug has that dk GREEN/ brown wire? All the wires are tightly wrapped, so before I start ripping everything apart I figured id ask. Thanks

according to the info i provided it's the plug that's BLACK/ green

Unplug them and take a look...

Mike M2

Tech Manager

CS Dealer Services