the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

hid h4 high/low on snowmobile


Post ReplyPost New Topic
< Prev Topic Next Topic >
offroadzj 
Gold - Posts: 2,043
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: June 03, 2005
Location: New York, United States
Posted: February 13, 2013 at 4:45 PM / IP Logged  
I put some DDM Tuning HID's in my 05 Ski Doo Mach Z snowmobile and I'm having a slight issue. The bulbs have a built in 'positioner' that makes the bulbs move outward for high beam and retract for low beam. However, my sled has a resting voltage of 5 volts on the high beam wire that is enough to actuate the bulbs. Anyone know of any way I can possibly fix this? I was thinking maybe a relay, but I'm not sure if 5 volts would be enough to still activate it...
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
Phreak480 
Copper - Posts: 84
Copper spacespace
Joined: June 12, 2003
Location: United States
Posted: February 14, 2013 at 8:51 AM / IP Logged  
I would try a diode or 2 inline with the relay to drop that 5 volts down even further to take it well out of the activation range of the relay. Diodes are cheap so not much loss in trying. Figure about .7 volts drop per diode so 2 drops you 1.4 volts which might be enough. Give it a shot.
offroadzj 
Gold - Posts: 2,043
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: June 03, 2005
Location: New York, United States
Posted: February 14, 2013 at 10:36 AM / IP Logged  
I was thinking either diodes or resistors but wasn't sure how many would be required or if there would be any ill affects from them.
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer