the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

has pats changed from 03 to 07?


Post ReplyPost New Topic
< Prev Topic Next Topic >
Fosgate3 
Copper - Posts: 328
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 29, 2004
Location: Louisiana, United States
Posted: August 11, 2013 at 8:44 AM / IP Logged  
Just a quick question here that I can't seem to find an answer for through my searches:
I want to install the remote start system that was in my gf's 2003 Mustang in her 2007 Mustang. I'm wondering if Ford did anything different to its PATS system that would require me to get a new interface or will the alarm swap over without any major difficulties.
Thanks for looking!
i think a wire's loose somewhere...
triniforever 
Copper - Posts: 323
Copper spacespace
Joined: November 12, 2008
Location: New York, United States
Posted: August 11, 2013 at 10:03 AM / IP Logged  
the PKALL or the PKFM will do bypass on both cars .
triniforever
kreg357 
Platinum - Posts: 7,783
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: August 11, 2013 at 10:53 AM / IP Logged  
It might depend on what is currently installed in the 2003 Mustang. Ford went from the PATS1 to the PATS3 system in the Mustang with the 2005 model. The 2003
only needed one key to program the bypass module while the 2007 will need two working, non-clone, keys to program the bypass module. Some bypass modules
can only be programmed once, to one car. The older chip transponder bypass modules ( like the 555FW ) are not as reliable as the newer Data style modules.
If you find a module like the Directed 1100F of the ADS TB, you can re-use it but if will be wired slightly differently because the change in the PATS system and
transponder connector. Might be easier to buy a 1100F for $20 and use that on the 2007 Mustang.
Soldering is fun!
Fosgate3 
Copper - Posts: 328
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 29, 2004
Location: Louisiana, United States
Posted: August 12, 2013 at 2:37 PM / IP Logged  
Okay. Thanks alot for the input!!
i think a wire's loose somewhere...

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 25, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer