the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

04 grand cherokee door connector pin


Post ReplyPost New Topic
< Prev Topic Next Topic >
reopfd4mwtnmq77 
Member - Posts: 26
Member spacespace
Joined: February 16, 2014
Location: Connecticut, United States
Posted: February 20, 2014 at 3:18 PM / IP Logged  
The wires in pin 4 and 7 on my front driver side door connector (the body side of the connector, not the door side) broke from years of opening/closing the door making the wires brittle.
They broke very close to the pins. I am looking to solder new lengths of wire in the footwell, installing a new pin on the end of each. I'm having a hard time finding the correct pin
Here are the pins
04 grand cherokee door connector pin - Last Post -- posted image.
Here is the component connector on the end of the harness which these pins go into
04 grand cherokee door connector pin - Last Post -- posted image.
Here is the list of pins/wires
04 grand cherokee door connector pin - Last Post -- posted image.
This is where the connector is
04 grand cherokee door connector pin - Last Post -- posted image.
Can anyone tell me exactly what the pin is for this C302 connector?
howie (aka: harryharris)
Silver - Posts: 355
Silver spacespace
Joined: February 17, 2014
Location: Florida, United States
Posted: February 20, 2014 at 4:07 PM / IP Logged  
Chrysler dealership.
Test before boxing up.
kreg357 
Platinum - Posts: 7,781
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: February 20, 2014 at 5:16 PM / IP Logged  
Another option.  While it's not as easy in the N.E. as other parts of the country, you could try a junk yard.  Might be able to get the whole connector with the wires cut after it enters the passenger compartment.  Not new, but serviceable with plenty of spares. 
Soldering is fun!
howie (aka: harryharris)
Silver - Posts: 355
Silver spacespace
Joined: February 17, 2014
Location: Florida, United States
Posted: February 21, 2014 at 3:05 AM / IP Logged  
Thanks K. I forgot that one!
I was also going to suggest Farnell or Mouser but you'd probably have to buy a 100 pack.
Out of interest on your remote start H1/4,5 and 6 aren't being used, the pins look similar, try depinning them.
Last thought two 18" lengths of same gauge wiring, Radio Shack etc.
Solder and go through the C302 plugs, drill through if needed.
You problem is that are literally hundreds of similar automotive connectors, Amp, Molex, etc. etc.
Test before boxing up.
Ween 
Platinum - Posts: 1,364
Platinum spacespace
Joined: August 01, 2004
Location: Illinois, United States
Posted: February 21, 2014 at 7:58 PM / IP Logged  
mopar package #05013961AA
reopfd4mwtnmq77 
Member - Posts: 26
Member spacespace
Joined: February 16, 2014
Location: Connecticut, United States
Posted: April 10, 2014 at 12:42 PM / IP Logged  
I tried mouser and TC, both of which I was able to order free (including shipping) "samples" - strips of 10 or so connectors of my choice. I got a couple that were close but not quite right.
Ween's Mopar part # is the exact part I needed. I didn't want to pay $50 many were asking, and ended up finding someone on eBay selling a similar part: #05013963AA. The wires were identical and it cost far, far less though, more than free.
04 grand cherokee door connector pin - Last Post -- posted image.
Thanks, guys. I got power back to the door. For anyone who stumbles across this thread in the future, I have 12 wires left with the pins attached. I'm happy to send you what you need free of charge.
jeepin4eva 
Member - Posts: 2
Member spacespace
Joined: January 21, 2015
Posted: January 21, 2015 at 9:00 PM / IP Logged  
Hi! I know it's been almost a year but any chance you still have a wire (or two) to spare? I'm installing foglights on my TJ and this is exactly what I need to connect to the half completed factory wiring. Thanks :)
reopfd4mwtnmq77 
Member - Posts: 26
Member spacespace
Joined: February 16, 2014
Location: Connecticut, United States
Posted: January 22, 2015 at 11:02 AM / IP Logged  
I'll check when I get home, but am quite certain I do have a bunch left. PM me your address and what you need. I'll send them out this week!
jeepin4eva 
Member - Posts: 2
Member spacespace
Joined: January 21, 2015
Posted: January 23, 2015 at 12:54 PM / IP Logged  
Thanks Reo! I PMed my address. Let me know your paypal and I'll cover your time and effort. :)

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer