the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

06 ford fusion s w/ crimestopper rs 4 g4


Post ReplyPost New Topic
< Prev Topic Next Topic >
jas51384 
Member - Posts: 32
Member spacespace
Joined: April 26, 2014
Location: Indiana, United States
Posted: May 14, 2014 at 5:17 PM / IP Logged  
What if I use the Power Lock gray / YELLOW - driver kick or SJB, conn. C, pin 4? this wire shows a little over 2 volts then to ground but I can't connect this directly to the Green activation because that wire is showing 3.75 volts and the difference between the two activates the remote start how do connect this to the relay?
jas51384 
Member - Posts: 32
Member spacespace
Joined: April 26, 2014
Location: Indiana, United States
Posted: May 15, 2014 at 10:26 AM / IP Logged  
Saw on the wiring diagram that there are 2 gray/brown wires at connector E. I only saw the one so I will have to recheck
flobee4 
Silver - Posts: 585
Silver spacespace
Joined: January 02, 2004
Location: United States
Posted: May 15, 2014 at 6:00 PM / IP Logged  
This is a PERFECT example of not testing before connecting....
You are on the left turn signal wire... Connector E PIN 11!!
You need to be on pin 17 of the same connector.
Pin 11 and 17 are the same color wire...Gray/brown
To properly test, You need to put your black test lead from your meter to ground. Put your red probe wire on the suspected wire and hit lock on either the door panel or the remote.
You can not use the negative lock wire. That is the door panel switch wire. That'll work if you want to sit in the car and hit lock on the door panel 3 times, but from the remote it wouldn't work. You need the door lock motor wire and convert the signal from a positive to a negative using a relay.
jas51384 
Member - Posts: 32
Member spacespace
Joined: April 26, 2014
Location: Indiana, United States
Posted: May 16, 2014 at 1:10 AM / IP Logged  
would you be able to show me the way to wire this relay? I have the positive trigger wire but it is only showing a little over 2 volts then to ground when i push the unlock button on the key fob. I looked through the relay wiring diagrams on this forum but didn't see my application.
prdjr165 
Copper - Posts: 293
Copper spacespace
Joined: October 31, 2002
Location: Illinois, United States
Posted: May 16, 2014 at 11:09 AM / IP Logged  
did you try this yet ?
85 & 87 - ground
86 - door lock motor wire (Lock Motor-gray/brown in the driver kick or SJB, conn. E, pin 17)
30 - crimestopper activation wire
jas51384 
Member - Posts: 32
Member spacespace
Joined: April 26, 2014
Location: Indiana, United States
Posted: May 16, 2014 at 1:56 PM / IP Logged  
I have to find the other gray brown wire. I only saw one and it was the left blinker. I have to recheck the plug and try again.
jas51384 
Member - Posts: 32
Member spacespace
Joined: April 26, 2014
Location: Indiana, United States
Posted: May 18, 2014 at 7:50 PM / IP Logged  
prdjr165 wrote:
did you try this yet ?
85 & 87 - ground
86 - door lock motor wire (Lock Motor-gray/brown in the driver kick or SJB, conn. E, pin 17)
30 - crimestopper activation wire
It worked thank you. I have to get the PATS unit programmed but I only have one key so I have to call the dealer.
Page of 3

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer