the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

aftermaket door actuator and avital 5103


Post ReplyPost New Topic
< Prev Topic Next Topic >
tejarillo 
Member - Posts: 21
Member spacespace
Joined: January 24, 2014
Location: Illinois, United States
Posted: November 11, 2014 at 11:17 AM / IP Logged Link to Post Post Reply Quote tejarillo
Okay so I have Install an avital 5103 with aftermarket door actuators Its been working great for about 9 months and all of the sudden it quit working I have replace the relays and fuses and somehow just the keyless entry quit working any help is appreciated.
It's install on 2004 Chevy Colorado like I said everything else still works great, alarm,and remote start works great.
smokeman1 
Platinum - Posts: 1,588
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: September 14, 2009
Location: Wisconsin, United States
Posted: November 11, 2014 at 8:07 PM / IP Logged Link to Post Post Reply Quote smokeman1
Check the lock/unlock connector at the 5103. I had some issues with a 5701 where the wires were bent over too tight and would loose the contact. Just a thought.
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
soundnsecurity 
Gold - Posts: 2,711
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 10, 2008
Location: Louisiana, United States
Posted: November 12, 2014 at 6:28 AM / IP Logged Link to Post Post Reply Quote soundnsecurity
can you tell if the relays are being activated but the locks just arent working? did you check the ground for the relays? if the ground came loose then nothing will work
racerjames76 
Silver - Posts: 581
Silver spacespace
Joined: November 22, 2008
Location: Ohio, United States
Posted: November 12, 2014 at 11:26 AM / IP Logged Link to Post Post Reply Quote racerjames76

I can not tell you how many of these non viper DEI units I have taken out of the box brand new and had all sorts of random things wrong. No door lock output, no ignition output, no starter output, bad remotes, bad antennas. This crap is hard enough without having to second guess whether the darn system is bad too.

Take the unit out and smell it around the door lock plug. If it smells burnt you will need a new unit. Otherwise it is time to unravel the tape and dig deeper. aftermaket door actuator and avital 5103 - Last Post -- posted image.

Did your relays have spike suppression diodes installed? These units seem to be extra susceptible to those relay spikes. aftermaket door actuator and avital 5103 - Last Post -- posted image.

To master and control electricity is perfection. *evil laugh*
tejarillo 
Member - Posts: 21
Member spacespace
Joined: January 24, 2014
Location: Illinois, United States
Posted: November 12, 2014 at 11:40 AM / IP Logged Link to Post Post Reply Quote tejarillo
No it didn't have any diodes at the relays but like I said I stop working all off the sudden and I'm pretty sure all connections are good I have replace the fuse and relays so I think it might be the avital brain.
I'll keep troubleshooting and let you guys know.
tejarillo 
Member - Posts: 21
Member spacespace
Joined: January 24, 2014
Location: Illinois, United States
Posted: November 16, 2014 at 9:29 PM / IP Logged Link to Post Post Reply Quote tejarillo
OK guys I got it figured out I ended up replacing all the wiring from relays to the actual actuators and the wires were a bit green and corroded
Thanks for all the help
dylan314 
Member - Posts: 1
Member spacespace
Joined: January 31, 2016
Location: Missouri, United States
Posted: February 12, 2016 at 11:51 AM / IP Logged Link to Post Post Reply Quote dylan314
what kind of diodes would be used for the door actuators? I'm about to install the Avital 5103L system in my 2004 4Runner.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer