2014 subaru forrester fob

Home / the12volt's Install Bay / Car Security and Convenience / 2014 subaru forrester fob (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: January 17, 2015 at 7:36 PM / IP Logged

Does anyone know if the keyless buttons on the factory remote work with the engine running ?

I am trying to see if I can use a one button starter on this 2014 Forrester non push start.

Back to Top

pentavolvo

Copper - Posts: 241

Joined: September 30, 2003

Location: United States

Posted: January 17, 2015 at 7:40 PM / IP Logged

Should work

Back to Top

Mark Mizenko

Copper - Posts: 460

Joined: October 13, 2004

Location: Pennsylvania, United States

Posted: January 17, 2015 at 11:22 PM / IP Logged

Yes.

2 starter wires.

Back to Top

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: January 18, 2015 at 5:34 AM / IP Logged

ok - thanks...

Back to Top

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: January 18, 2015 at 9:06 AM / IP Logged

Yes it'll work.

Be sure not to trigger keysense during remote start. (If the car sees keysense, the oem remotes won't work.)

Also, not sure what you're using for a bypass. Key in a box should be ok. If you're using an ALCA or FLCAN, you might end up having to disable the factory alarm. (The procedure is in the car's owner's manual.)

Back to Top

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: January 18, 2015 at 7:27 PM / IP Logged

I am using an idatalink blade-al and it shows to connect the keysense wire.I guess I'll have to See what happens.

Back to Top

beegbie

Copper - Posts: 341

Joined: August 17, 2002

Location: United States

Posted: January 18, 2015 at 8:14 PM / IP Logged

The wire from the idatalink harness is an input not an output. You should be fine.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2014 subaru forrester fob

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.