Viper 5706v Failsafe Starter kill

Home / the12volt's Install Bay / Car Security and Convenience / Viper 5706v Failsafe Starter kill

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: April 23, 2015 at 1:38 AM / IP Logged

You're reading it wrong or lack of understanding.

Relay will only trigger if alarm is on an there's an attempt to hot wire the ignition.

kreyzie

Member - Posts: 22

Joined: March 26, 2015

Location: Hong Kong

Posted: April 23, 2015 at 8:35 PM / IP Logged

I guess you dont really understand what my question is. I am asking why 30 is connected to 87 (12v) when the alarm is triggered. Because i need to know why is starter connected to a constant 12v when the relay is triggered .. what is the function of connecting the starter to a 12v when the relay is triggered.

kreyzie

Member - Posts: 22

Joined: March 26, 2015

Location: Hong Kong

Posted: April 23, 2015 at 8:40 PM / IP Logged

can i just leave the relay pin 87 empty ? i get that if the alarm is armed and when the ignition is turn on , the relay trigger and will cut off the connection of the starter from the key side.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: April 24, 2015 at 3:49 AM / IP Logged

Its simply a work around because your alarm appears to work when the engine is running.

That apart, you're correct but join your violet H3 also to 30 and as you say don't connect 87 to anything.

kreyzie

Member - Posts: 22

Joined: March 26, 2015

Location: Hong Kong

Posted: June 18, 2015 at 10:47 PM / IP Logged

howie , the diagram will not work. Here is why

Starter motor key side is connected to brain green wire.

Starter motor side is connected to violet wire.

If i dont connect the keyside to the brain , engine wont start by remote start.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: June 19, 2015 at 2:28 AM / IP Logged

It will if you follow the diagram and connect power to 87.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: June 19, 2015 at 2:31 AM / IP Logged

You know you're right.

I tried to combine security with start forget the last few comments.

Did you try to test continuity between green and violet (purple) on H3 when alarm is either on or off?

kreyzie

Member - Posts: 22

Joined: March 26, 2015

Location: Hong Kong

Posted: June 22, 2015 at 3:25 AM / IP Logged

yeah i did... i just dont understand such good brand sent me a faulty unit... i also did a test n found out that whenever i did a remote stary , yhe brain doesnt draw power from h3 green. so is pointless to connect the key side of starter to h3 green. i will cut it off and wire it to external relay for fail safe.

< Prev Page

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.