Failing at my Dball2 install

Home / the12volt's Install Bay / Car Security and Convenience / Failing at my Dball2 install

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

icearrow6

Copper - Posts: 497

Joined: February 02, 2009

Location: California, United States

Posted: August 15, 2015 at 5:18 PM / IP Logged

On the install guide you should be looking at the Type 2 installation. the chart at the above the graphic list the MUX wire and location. This is for the door locks. in your case its GREEN/ Red in driver kick panel.

Back to Top

icearrow6

Copper - Posts: 497

Joined: February 02, 2009

Location: California, United States

Posted: August 15, 2015 at 5:25 PM / IP Logged

Sorry the brake wire is RED / white to RED / yellow on the pedal. my bad.

Back to Top

reefcrazed

Member - Posts: 7

Joined: August 15, 2015

Posted: August 15, 2015 at 6:39 PM / IP Logged

Well now I have a serious problem. I was trying to wire up the door locks, all looked well. The doors were locking/unlocking as expected. Now when I put the key in the ignition the car locks and stays locked. You cannot even unlock the car. If you take the key out of the ignition you can unlock the car. I have no idea what is going on here but at the point I need to fix this and just get this to an installer. Even with the power out of the alarm my car is locking the doors when the key is in the ignition. If you manually unlock the doors it locks them right back.

Back to Top

< Prev Page

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.