Members
Search
Register
Login
Posted: December 02, 2019 at 10:10 PM / IP Logged
Check the heavy gauge black/red and white/red wires in the ignition harness.
They should be connected to the green and purple wires from the heavier gauge 6 pin harness of the remote starter.
Wiring diagram for vehicle in case you need it.
http://diagrams.marktoonen.nl/printlist.aspx?MakeID=3&ModelID=17391
Remote Start install manual
https://sc.voxxintl.com/docs/common/APS622E/APS622E_IM.pdfSteve G
They should be connected to the green and purple wires from the heavier gauge 6 pin harness of the remote starter.
Wiring diagram for vehicle in case you need it.
http://diagrams.marktoonen.nl/printlist.aspx?MakeID=3&ModelID=17391
Remote Start install manual
https://sc.voxxintl.com/docs/common/APS622E/APS622E_IM.pdfSteve G
If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Saturday, April 20, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Saturday, April 20, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
