remote start, 2004 GMC Yukon

Home / the12volt's Install Bay / Car Security and Convenience / remote start, 2004 GMC Yukon

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

mscguy

Copper - Posts: 212

Joined: November 28, 2015

Location: British Columbia, Canada

Posted: January 16, 2016 at 3:19 PM / IP Logged

Just out of curiosity, how did you wire your 2nd ign or acc without a relay?

Back to Top

trucks967

Member - Posts: 7

Joined: January 13, 2016

Location: Idaho, United States

Posted: January 16, 2016 at 5:08 PM / IP Logged

well went with insructions and kregs pics I didn't see any there either

Ruben

Back to Top

trucks967

Member - Posts: 7

Joined: January 13, 2016

Location: Idaho, United States

Posted: January 16, 2016 at 5:15 PM / IP Logged

how would I change from flash to constant ?

Ruben

Back to Top

mscguy

Copper - Posts: 212

Joined: November 28, 2015

Location: British Columbia, Canada

Posted: January 16, 2016 at 6:49 PM / IP Logged

Programming is on the back of the sheet that came with your starter. If not, search for your unit in the downloads section here. It's there.

Back to Top

< Prev Page

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.