Viper 5806 for enclosed trailer

Home / the12volt's Install Bay / Car Security and Convenience / Viper 5806 for enclosed trailer

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

mcnugget

Member - Posts: 17

Joined: March 25, 2016

Location: Minnesota, United States

Posted: April 01, 2016 at 6:10 PM / IP Logged

Well that might be harder, but it's still possible. You'd just have to get a pinout to determine which two are for the antenna and break out those wires. Anyway, I don't think you need to do that. You just need to get the antenna outside

Back to Top

p023879

Member - Posts: 10

Joined: March 20, 2016

Location: Massachusetts, United States

Posted: April 01, 2016 at 7:43 PM / IP Logged

That can't go outside as it's the valet switch also and not weatherproof.

Back to Top

mcnugget

Member - Posts: 17

Joined: March 25, 2016

Location: Minnesota, United States

Posted: April 01, 2016 at 7:47 PM / IP Logged

I'm well aware that you can't put that antenna outside. You know what you need to do and you know how to do it. Good luck.

Back to Top

< Prev Page

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.