the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2003 dodge ram diesel, viper 5706v


Post ReplyPost New Topic
< Prev Topic Next Topic >
scootwa 
Member - Posts: 11
Member spacespace
Joined: February 29, 2016
Location: Washington, United States
Posted: April 20, 2016 at 9:43 PM / IP Logged Link to Post Post Reply Quote scootwa
Disconnected no triggers hooked up. No bypass module because I have the non security key. So I will wait and see what happens tonight.
scootwa 
Member - Posts: 11
Member spacespace
Joined: February 29, 2016
Location: Washington, United States
Posted: April 22, 2016 at 7:19 PM / IP Logged Link to Post Post Reply Quote scootwa
Ive narrowed it down to the pke2102t. I unplugged the power to it and no false alarms. I called the installer. There telling me that only the d2d and antenna wiring is needed not the analog port two. When i interpret the instructions i see that it requires both the d2d port and analog port wired in my application. Running the gsm 250 with 1706v viper alarm and the pke 2102t. Any ideas if that's correct? With no trigger wires hooked up the alarm still trips open door erroneously. Usually inconveniently. But since ive unplugged the pke 12v input no erroneous triggers
scootwa 
Member - Posts: 11
Member spacespace
Joined: February 29, 2016
Location: Washington, United States
Posted: April 22, 2016 at 7:30 PM / IP Logged Link to Post Post Reply Quote scootwa
Two typos should've said 5706v and vsm250
pts760 
Copper - Posts: 403
Copper spacespace
Joined: December 11, 2009
Location: United States
Posted: April 25, 2016 at 11:32 AM / IP Logged Link to Post Post Reply Quote pts760
From looking at the install manual the analog port on the PKE, the horn is the only thing that needs to be wired but the door trigger ignition output and brake needs to be hooked up on the 5706V. I could be wrong but that's what I interpret. DEI does goofy doodie and that's why I don't use it. I would call tech support to be for certain.
I drink current, eat ohms, and bleed voltage
Page of 2

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer