VW Blade Al

Home / the12volt's Install Bay / Car Security and Convenience / VW Blade Al

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

kubota832

Member - Posts: 2

Joined: April 08, 2016

Location: New Jersey, United States

Posted: April 08, 2016 at 8:36 AM / IP Logged

Hello,

I just installed a CM7200 remote start in a 2013 VW Tiguan. I'm having a few issues with the OEM alarm.

1) Locking doors it works fine. OK

2) Un-locking doors it works fine BUT the car will re-arm itself in 3 seconds.

3) The remote start works BUT it would shut down as soon as it starts because the oem alarm would re-arm itself right when it starts up.

I have tried all kinds of settings just can't figure it out.

I'm using a 556u box to store a key and the blue wire from the 556u is hooked up to the POC#8 on the CN5 hardness pin number 15 Status out.

I can't figure out why the OEM alarm would re-arm itself after a few seconds.

Would deeply appreciate any help given. Thanks Andy

Back to Top

kubota832

Member - Posts: 2

Joined: April 08, 2016

Location: New Jersey, United States

Posted: April 11, 2016 at 4:11 AM / IP Logged

Issue was resolved... I found the problem. It works great.

Back to Top

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: April 11, 2016 at 3:51 PM / IP Logged

tell us what the problem was..

Back to Top

mcnugget

Member - Posts: 17

Joined: March 25, 2016

Location: Minnesota, United States

Posted: April 12, 2016 at 1:08 PM / IP Logged

What was the problem?

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.