the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Dball2 key programming problem


Post ReplyPost New Topic
< Prev Topic Next Topic >
chrisj000 
Member - Posts: 38
Member spacespace
Joined: August 24, 2016
Location: United Kingdom
Posted: September 27, 2016 at 3:39 AM / IP Logged Link to Post Post Reply Quote chrisj000
They don't make it easy although I've found the transponder ring inside the case it may work with a few modifications,this is one unplugged from the pcbDball2 key programming problem - Page 4 - Last Post -- posted image.
lurch228 
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: September 27, 2016 at 4:07 AM / IP Logged Link to Post Post Reply Quote lurch228
Like to meet the engineer that thought that up so I could slap him in the head and ask him what were you thinking? Apparently the immobilizer antenna ring was a after thought!
chrisj000 
Member - Posts: 38
Member spacespace
Joined: August 24, 2016
Location: United Kingdom
Posted: September 27, 2016 at 6:29 AM / IP Logged Link to Post Post Reply Quote chrisj000
The only way i can think of doing this is to solder wires to where the red arrows are then drill a small hole in the casing to bring them to the outside.the other option is there is a small chance that a antenna ring will fit where the I've marked white but only have 1-2mm space to work with.what are your thoughts on this?      Dball2 key programming problem - Page 4 - Last Post -- posted image.
lurch228 
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: September 27, 2016 at 8:48 AM / IP Logged Link to Post Post Reply Quote lurch228
Go with the non solder option, It will be a tight squeeze but it should fit. Hot glue tack it if necessary to keep it in place just go easy with the hot glue.
chrisj000 
Member - Posts: 38
Member spacespace
Joined: August 24, 2016
Location: United Kingdom
Posted: September 27, 2016 at 8:51 AM / IP Logged Link to Post Post Reply Quote chrisj000
Will give it a try when it arrives and report back,thanks for all your time you've been very helpful
chrisj000 
Member - Posts: 38
Member spacespace
Joined: August 24, 2016
Location: United Kingdom
Posted: October 19, 2016 at 2:24 PM / IP Logged Link to Post Post Reply Quote chrisj000
Just a quick update,everything is working as it should,the 556uw was an easy job in the end and the transponder ring just about fitted in the space available,thanks for all your help and advice
Chris
Page of 4

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer