the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2013 chevy traverse, avital 4103


Post ReplyPost New Topic
< Prev Topic Next Topic >
ricardoboston 
Copper - Posts: 268
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: May 11, 2009
Location: Massachusetts, United States
Posted: October 17, 2016 at 9:01 PM / IP Logged Link to Post Post Reply Quote ricardoboston
GUYS I'm installing a remote start avital 4103 and ads al ca on this vehicle my question is i know the bypass goes connected to ing and acc heavy gauge wires should i have to get the heavy wires connected to the car like purple start wire and ign and acc?or just do as idatalink says will handle the start, acc and ign ?thanks
lurch228 
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: October 17, 2016 at 9:08 PM / IP Logged Link to Post Post Reply Quote lurch228
Data controlled functions don't need to be hard wired.
ricardoboston 
Copper - Posts: 268
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: May 11, 2009
Location: Massachusetts, United States
Posted: October 18, 2016 at 6:30 AM / IP Logged Link to Post Post Reply Quote ricardoboston
lurch228 hi i have already hardwire just need to know if i need to hook up the start wire purple ignition wire pink and acessory orange wire have gauges to the car ign acc start wire thanks
lurch228 
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: October 18, 2016 at 6:49 AM / IP Logged Link to Post Post Reply Quote lurch228
Follow idatalink first. Only connect what idatalink doesn't do to R/S, then test.
ricardoboston 
Copper - Posts: 268
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: May 11, 2009
Location: Massachusetts, United States
Posted: October 18, 2016 at 7:14 AM / IP Logged Link to Post Post Reply Quote ricardoboston
oh ok just one more question if the radio stays on should i pulse negative on the drivers door pin using a relay and factory alarm rearm .thanks
lurch228 
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: October 18, 2016 at 6:45 PM / IP Logged Link to Post Post Reply Quote lurch228
If bypass doesn't support that function then yes.
ricardoboston 
Copper - Posts: 268
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: May 11, 2009
Location: Massachusetts, United States
Posted: October 18, 2016 at 7:23 PM / IP Logged Link to Post Post Reply Quote ricardoboston
lurch228 thanks works just perfect

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer