toyota JBL amp.

Home / the12volt's Install Bay / Car Audio / toyota JBL amp.

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

vintagetech

Member - Posts: 4

Joined: August 09, 2016

Location: British Columbia, Canada

Posted: February 02, 2017 at 6:28 PM / IP Logged

Anyone know the pinout or color code for the input side of the 2013 Rav4 JBL amp. I want to replace it with aftermarket and its defective so I cant LOC it on the speaker side.

CSI Comox Valley

Back to Top

kaezoo

Copper - Posts: 125

Joined: April 26, 2005

Location: United States

Posted: February 05, 2017 at 7:27 AM / IP Logged

You won't be able to replace the factory amp with an after-market one if you keep the original head unit. The JBL system in this vehicle uses a data-controlled amplifier. The head unit has only a fixed line-level 2-channel output. Volume and fader adjustment is done at the amplifier, using data bus commands from the head unit. An after-market amplifier won't work with this system, so you'll either need to replace the head unit as well, or find a replacement factory amplifier.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.