the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2006 Toyota Camry CAN wires


Post ReplyPost New Topic
< Prev Topic Next Topic >
data12volt 
Member - Posts: 2
Member spacespace
Joined: May 24, 2017
Location: Montana, United States
Posted: May 24, 2017 at 10:12 PM / IP Logged Link to Post Post Reply Quote data12volt
Hello All at 12Volt. I have a 2006 Toyota Camry LE and am trying to get my aftermarket front parking sensors to work correctly. These front parking sensors are required to be connected to CAN H and CAN L (to monitor vehicle speed). Every resource I've checked says that the CAN H and CAN L wires are on the OBDII connector (pins 6 and 14) but unfortunately, those pins are empty on my OBDII connector. According to other resources, CAN H and CAN L operate at 3.75V and 1.25V respectively, while resting at 2.5V. I attempted to create those voltages with a DC transformer with no success; it's very possible my transformer was not accurate enough. I've also attempted to operate the parking sensors without the connections to CAN H and CAN L suggested by the company's tech support; that did not work either. Finally, I have verified that my vehicle is really a 2006 based on the VIN. Does anyone have any ideas to get my parking sensors working correctly besides buying a new car? I'd be greatly appreciative. Thanks for your time.
rs specialist 
Copper - Posts: 175
Copper spacespace
Joined: September 30, 2015
Location: Arizona, United States
Posted: June 20, 2017 at 11:39 AM / IP Logged Link to Post Post Reply Quote rs specialist
I do not believe that the 2006 Camry has the information on the CAN network that you are looking for. I would imagine that you are going to have to find the actual VSS wire in order for this to work properly. If you post the information of what product you are trying to install we could possibly help you figure this out.
data12volt 
Member - Posts: 2
Member spacespace
Joined: May 24, 2017
Location: Montana, United States
Posted: June 21, 2017 at 8:03 PM / IP Logged Link to Post Post Reply Quote data12volt
Thank you rs specialist for your response. I have verifed the location of the VSS wire. The front parking sensors are Rostra 250-1920-FZ. Attached is the wiring diagram from the installation manual. Looking forward to hearing from you soon. Thanks again! 2006 Toyota Camry CAN wires - Last Post -- posted image.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, June 19, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer