the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2017 accord standard key add on using factory fo


Post ReplyPost New Topic
< Prev Topic Next Topic >
mazda 6t9 
Member - Posts: 33
Member spacespace
Joined: December 30, 2005
Location: United States
Posted: July 25, 2017 at 10:45 PM / IP Logged Link to Post Post Reply Quote mazda 6t9
What is the procedure for unlocking the doors when started via aftermarket system with factory key fobs. Idatalink says to cut the ignition wire but was not very specific on the details on that. I may have to call back on that tomorrow when I am into the vehicle. I know it is says to cut the ignition wire on idatalink ads-al (dl)-ha6-en. But I am not sure how that will fix the issue being he said a relay was needed. I could see if a keyless module needed the ignition cut to not see the ignition to still operate or how Toyotas need the keysense wired in to not see it.
beegbie 
Copper - Posts: 341
Copper spacespace
Joined: August 17, 2002
Location: United States
Posted: July 26, 2017 at 5:14 PM / IP Logged Link to Post Post Reply Quote beegbie
Just follow the guide, no relay needed. Cutting the ignition allows the factory keyless data to be accepted by the immobilizer ring (also the keyless antenna). It then reads those codes and converts them into lock/unlock messages that it sends through can.
mazda 6t9 
Member - Posts: 33
Member spacespace
Joined: December 30, 2005
Location: United States
Posted: July 30, 2017 at 1:34 PM / IP Logged Link to Post Post Reply Quote mazda 6t9
It worked very well. I had to use the data cable (I mainly use wire to wire but this was pretty slick).

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer