the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Door actuator


Post ReplyPost New Topic
< Prev Topic Next Topic >
ouikikazz 
Member - Posts: 2
Member spacespace
Joined: January 11, 2011
Location: New York, United States
Posted: July 26, 2017 at 8:50 AM / IP Logged Link to Post Post Reply Quote ouikikazz
Very new to this stuff so bear with me...did a search did some digging and wanted to confirm what I found is correct before I attempt this. I have a 06 f150 with remote entry from factory. Not installing an alarm or remote start but I wanted to add a power lock onto my tailgate there I got a two wire actuator and I'm guessing I need to follow this: https://www.the12volt.com/relays/relaydiagram4.html   2 relay setup?
And for the power lock and unlock I can follow this wiring https://www.the12volt.com/installbay/forum_posts.asp?tid=46343 and use the power lock and unlock wiring from that harness?
i am an idiot 
Platinum - Posts: 13,667
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: July 26, 2017 at 9:49 AM / IP Logged Link to Post Post Reply Quote i am an idiot
Yes
Yes
ouikikazz 
Member - Posts: 2
Member spacespace
Joined: January 11, 2011
Location: New York, United States
Posted: July 26, 2017 at 9:57 AM / IP Logged Link to Post Post Reply Quote ouikikazz
i am an idiot wrote:
Yes
Yes
Read on a Ford forum that I could just tap into the two wires into actuator and forego the relays...but everything I'm reading here says use relays...what's the right way?
chrisr1 
Member - Posts: 5
Member spacespace
Joined: July 29, 2017
Location: Ireland
Posted: July 29, 2017 at 1:57 AM / IP Logged Link to Post Post Reply Quote chrisr1
Hi ,
I'm new here:) so please bearrange with me .
I have a similar situation. I'm. Based in Ireland and have a transit 2017 lwb. I would like to add a secondary deadbolt to the central locking . So when I locked the van with the remote it also activates a dead bolt. The dead bolt I have is based on a central locking actuator. Any help greatly appreciated.
Cheers

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, April 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer