Engine shuts off after 60 seconds

Home / the12volt's Install Bay / Car Security and Convenience / Engine shuts off after 60 seconds

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mhunguyen

Member - Posts: 32

Joined: February 27, 2016

Location: Massachusetts, United States

Posted: August 11, 2017 at 12:20 PM / IP Logged

Hi

I just finished installing a viper 4806 to a 2016 Honda Accord (STD Key) using ASD ALCA bypass. Everything seems to be working except the engine would shut off after around 60 seconds after starting. It would then try to start after shut off, except this time, it keeps on cranking and do not start. I think it might be a Tach issue, but not sure how to go about fixing it. So hoping someone could point me to the right direction.

btw - i followed Kreg's guide on his tutorial for the 13-14 Accord.

Thanks in advance

Back to Top

brownsfan1

Copper - Posts: 65

Joined: January 28, 2016

Location: Ohio, United States

Posted: August 11, 2017 at 5:23 PM / IP Logged

Is the unit set for voltage sense , virtual tach or tach? I'm going to guess it's set for virtual tach. The Alca provides a tach output I believe in that car. Use that. Virtual tach is not very reliable. I say virtual tach creates a very real customer come back.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.