cm4200 program issue

Home / the12volt's Install Bay / Car Security and Convenience / cm4200 program issue

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rboe8289

Member - Posts: 2

Joined: August 19, 2017

Location: Alberta, Canada

Posted: August 19, 2017 at 3:12 AM / IP Logged

I have a cm4200 brain and a Ant1-WAM antenna with a 700R remote fcc VA5JR260A433

The brain clicks to accept programming but it will not accept the remote when i press the lock button

Also, does the blue wire from Jumper setting need to be attached to the corresponding setting or can it be left un-connected? I have it set for 2nd Ign but I do not have that so it is left un-connected.

DIY Enthusiast

Back to Top

rboe8289

Member - Posts: 2

Joined: August 19, 2017

Location: Alberta, Canada

Posted: August 19, 2017 at 3:13 AM / IP Logged

This is installed in a 2003 Mitsubishi Lancer

DIY Enthusiast

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.