2017 Ford Transit Custom UK Model, Viper 3305V

Home / the12volt's Install Bay / Car Security and Convenience / 2017 Ford Transit Custom UK Model, Viper 3305V

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: October 15, 2017 at 7:14 AM / IP Logged

Yes pin 3 to door input green.

Don't bother with brake output.

Pin 12 hood status, isn't there a grey hood pin input on the 3305? If so that not the blue.

Forget or don't bother with the black/white.

the vuking

Member - Posts: 48

Joined: August 23, 2017

Location: United Kingdom

Posted: October 15, 2017 at 7:36 AM / IP Logged

There is no grey hood input on the 3305 does this mean the pin12 not required ?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: October 15, 2017 at 8:11 AM / IP Logged

Yes, connect to blue.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: October 15, 2017 at 1:38 PM / IP Logged

Not needed:-

ACC

Starter from alarm They aren't there anyway!

RAP cut not needed.

Key sense not needed.

TX and RX not needed at PATS (doubt there's one anyway on UK vehicles).

the vuking

Member - Posts: 48

Joined: August 23, 2017

Location: United Kingdom

Posted: October 16, 2017 at 1:01 PM / IP Logged

I have the 3305v on the bench with a battery connected to it the brain is arming and disarming is there any reason why I have now GWA output ?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: October 16, 2017 at 4:22 PM / IP Logged

Do you mean NO GWA? And please, if you aren't using it, stop worrying, just get on with it.

The more questions you ask the more I wonder how long this saga will continue.

the vuking

Member - Posts: 48

Joined: August 23, 2017

Location: United Kingdom

Posted: October 16, 2017 at 5:58 PM / IP Logged

Yes I do mean no gwa but I will need it for the starter kill relay which you have already said will be a good idea on a transit custom.Also I have a 507 tilt sensor along with the viper illuminated window sticker that both need gwa. so the the question was to establish why I have no gwa.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: October 16, 2017 at 11:20 PM / IP Logged

Program white/blue to give GWA.

This will be enough to run the immobiliser relay.

Direct ground on the tilt sensor.

Don't bother with the window sticker, lasts about 1 winter.

When you say no GWA is the control centre blue light flashing or constant?

OR exchange the unit.

the vuking

Member - Posts: 48

Joined: August 23, 2017

Location: United Kingdom

Posted: March 04, 2018 at 4:09 PM / IP Logged

Hi there mgoetz do you have the directed link to that page please ? As I have had to wait a painful 11 months ford Ford to exchange my van now I have the new one it’s time for the install 1 thing has changed and that is the alarm being fitted now is a viper 3606v Thanks.

< Prev Page

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.