When using D2D can i turn off OEM Remote Funct?

Home / the12volt's Install Bay / Car Security and Convenience / When using D2D can i turn off OEM Remote Funct?

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

shadowinfector

Copper - Posts: 199

Joined: October 02, 2003

Posted: August 31, 2017 at 9:55 PM / IP Logged

Aftermarket Alarm Ctrl from OEM remotes.

I want to install using D2D either directed, idatalink, or fortin, but all the bypass modules have the OEM Remote control to control aftermarket alarm. In this case i dont want the oem remote to be able to arm/disarm the aaftermarket alarm. Is that possible to turn off or is my only option is to do W2W with the dball2 or db3? Maybe im able to flash older firmware?

Any ideas? thanks

Back to Top

Search for other posts by shadowinfector

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 01, 2017 at 6:04 AM / IP Logged

You can turn it off when you flash, gives you an options list underneath. I always do that.

Back to Top

shadowinfector

Copper - Posts: 199

Joined: October 02, 2003

Posted: September 01, 2017 at 6:31 AM / IP Logged

Ah ha....never realized that lol... Thanks

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.