ignition switch, 2000 Silverado

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / ignition switch, 2000 Silverado

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

williambill

Member - Posts: 1

Joined: September 20, 2017

Location: Oklahoma, United States

Posted: September 20, 2017 at 2:40 AM / IP Logged

2000 silverado exstended cab 4x4 factory installed securty system // anyway the ignition switch would lock up and not turn eather directions be connected to a trigger in the sacurty system ? had no problems pryer . i shut truck off and got out loaded few tools and got back in and the switch would not turn and the sacurty light flashing on and off // key slides in and out normal like , just wont turn..

Back to Top

abethebue

Member - Posts: 26

Joined: July 22, 2010

Location: California, United States

Posted: September 20, 2017 at 11:35 PM / IP Logged

Tug the steering wheel to the left or right while trying to turn the key

abethebue

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 22, 2017 at 10:57 AM / IP Logged

You've got to laugh if that was the answer.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.