the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Box Depth for Speaker?


Post ReplyPost New Topic
< Prev Topic Next Topic >
fathershelper 
Member - Posts: 1
Member spacespace
Joined: January 18, 2018
Location: Arizona, United States
Posted: January 31, 2018 at 10:31 AM / IP Logged Link to Post Post Reply Quote fathershelper
Hello, ive built a ported box. One thing i overlooked was the mounting depth. The slot port runs along the back wall. The speaker barely fits. The magnet may actually be touching the port wall. I was wondering if anyone knows if this is going to be a problem. It sounds good but i only tested it a little. I the sub is vented through the magnet and the baffle is at an angle so if the magnet is touching it would be angled and only touching at the very top. I cant find any info on speaker installation as far as how close it can be to the back wall of an enclosure?
Whats that noise?
series vii 
Member - Posts: 27
Member spacespace
Joined: May 05, 2014
Location: California, United States
Posted: February 01, 2018 at 8:24 PM / IP Logged Link to Post Post Reply Quote series vii
You don't want the magnet against the wood be either the rear wall, port etc...
Since the woofer is vented out the bottom of the magnet, I would leave min 1" clearance, more won't hurt.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, December 3, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer