2018 Nissan Rogue Head Unit Wiring

Home / the12volt's Install Bay / Car Audio / 2018 Nissan Rogue Head Unit Wiring

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

jh1973

Copper - Posts: 50

Joined: April 04, 2018

Location: Illinois, United States

Posted: August 10, 2018 at 1:27 PM / IP Logged

i am an idiot wrote:

An LOC converts speaker level to preamp level. Wires between radio and amplifier are preamp level. Very few vehicles with an OEM amplifier have enough level on their preamp section to drive an aftermarket amplifier. You will need to use an LOC but you have to connect it to the wires between the amplifier and the woofer. How many wires are there going into the woofer?

That's interesting to note.In your opinion,what is the best way to see the amount of voltage a stock head unit is pumping to its preamp outs?Place the DMM on AC volts and hook the probes to the connector while playing a sine wave of say 1000hz or so?

Rumors of Bob but never Bob......So what is it you tell people you do these days Bob?

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: August 10, 2018 at 1:50 PM / IP Logged

That will work.

Back to Top

< Prev Page

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.