DEI 530T Wiring

Home / the12volt's Install Bay / Car Security and Convenience / DEI 530T Wiring

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

tegguy

Copper - Posts: 155

Joined: December 21, 2009

Location: Florida, United States

Posted: June 28, 2019 at 12:50 PM / IP Logged

Quick question.... I'm working to install a DEI 530T module for the front windows in my 1972 Chevelle. On the switch wiring is the module looking for a 12V or ground signal or does it matter? I have the option to wire this either way and just want to ensure it works.

Back to Top

tegguy

Copper - Posts: 155

Joined: December 21, 2009

Location: Florida, United States

Posted: June 28, 2019 at 3:28 PM / IP Logged

Ignore me I didn't read far enough down the manual this is set by a dip switch

Back to Top

catback

Silver - Posts: 703

Joined: August 13, 2002

Location: Canada

Posted: June 28, 2019 at 7:18 PM / IP Logged

I know you found your answer but me personally I have my aftermarket power window motor leads resting at ground - the ground on one lead is swapped for power at the switch when I activate the window.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.