2018 Toyota Avalon PTS Remote Start Install

Home / the12volt's Install Bay / Car Security and Convenience / 2018 Toyota Avalon PTS Remote Start Install

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mcgrathe

Member - Posts: 15

Joined: March 22, 2019

Location: Virginia, United States

Posted: September 11, 2019 at 6:22 PM / IP Logged

Hello all. Would anyone have the diagram to install an iDatalink ADS-ALCA and viper 4606V D2D into a 2018 smart key Push Button Start Toyota Avalon. the factory remote range is horrible so i want to use my 4606V and program the 2 way remote i have.

Thank you

Eric M

Back to Top

cpalmer

Copper - Posts: 109

Joined: March 18, 2007

Location: United States

Posted: September 11, 2019 at 6:49 PM / IP Logged

Should be able to find what you need on the iDatalink website. Do you have an XL202 from DEI to go with that?

Back to Top

mcgrathe

Member - Posts: 15

Joined: March 22, 2019

Location: Virginia, United States

Posted: September 11, 2019 at 7:20 PM / IP Logged

Hmm. No not familiar with the XL202. In my 15 pilot I did it all with a 4606V and programmed a 7756v lcd remote to it and the ALCA d2d. Can I use just an Alca and an xl202 with 2 way lcd remote and eliminate 4606v alarm?

Eric M

Back to Top

mgoetz74

Silver - Posts: 424

This member consistently provides reliable information

Joined: February 15, 2012

Location: United States

Posted: September 12, 2019 at 1:20 PM / IP Logged

http://images.idatalink.com/corporate/Content/Manuals/DL-TL6/ADS-AL(DL)-TL6-EN_20190726.pdf

why not just use the alca and do RSR and add on a 2 way compsutar remote pack? The viper remote start is over kill considering there is no take over for Toyotas so when you open the door the RS will shut down and you have to restart the car. $100 for alca and $100 for compustar remote pack (prime r3 or prime g15). Would do the prime r3 since you really only need remote start since the car unlock when you walk up to the car with the prox key

RSR-

http://images.idatalink.com/corporate/Content/Manuals/RS-TL6/OEM-AL(RS)-TL6-[ADS-ALCA]-EN_20190726.pdf

33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!

Back to Top

mcgrathe

Member - Posts: 15

Joined: March 22, 2019

Location: Virginia, United States

Posted: September 12, 2019 at 4:21 PM / IP Logged

I already have all the viper stuff but yes what you suggested would work to. I’m curious if an XL202 will communicate with the ALCA? I Also have a Directed DB3 that I can get flashed. Would that most likely be the best option used with an XL202?

Thank you

Eric M

Back to Top

silvercivicsir

Copper - Posts: 402

Joined: November 21, 2003

Posted: September 15, 2019 at 4:53 PM / IP Logged

xl202 will work with a Dball2 or Dball 3

Back to Top

Search for other posts by silvercivicsir

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.