Shut Down Feature in Alarm System

Home / the12volt's Install Bay / Car Security and Convenience / Shut Down Feature in Alarm System

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

securelabs

Member - Posts: 1

Joined: May 04, 2020

Location: Trinidad and Tobago

Posted: May 04, 2020 at 9:57 PM / IP Logged

I once a an alarm system with an immbilizer thing I believe, when the car starts it will drive for 30 sec then shut down and alarm will go off and will not restart until I do a lock/unlock sequence with the power lock switch.

The feature had to be enabled a certain way too. Using the alarms remote would not disable this.

Anyone ever had this feature or know what is required

Securelabs

Back to Top

davep.

Gold - Posts: 641

Joined: May 27, 2011

Location: California, United States

Posted: May 05, 2020 at 8:40 PM / IP Logged

I had a similar "anti-hijack" deal in my 93 s-blazer. Wasn't interfaced to the horn, however. It was defeated by a hidden toggle switch, you had to hit the toggle within about 30 seconds or the truck died and wouldn't re-start. It came from Jacobs Electronics. Jacobs had a big catalog of stuff and full of hype. The anti-hijack device lasted about 5 years and failed electronically. As I recall, the Jacobs stuff became known for not being very good.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.