Directed 535T Window Automation System

Home / the12volt's Install Bay / Car Security and Convenience / Directed 535T Window Automation System

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

itolond

Copper - Posts: 87

Joined: February 13, 2016

Location: Singapore

Posted: October 26, 2020 at 12:53 AM / IP Logged

Hi Forum,

wiring in a set of 535T - one for the front set of windows and one for the rear windows, some weird things happening and need some guide about haw to start fault finding (new install)

A windows work as prescribed all ok here- however my drivers-side rear window rolls down when i turn the ignition off (anything other than IGN position) - not other windows do this - where to to start to chase this down?

Back to Top

itolond

Copper - Posts: 87

Joined: February 13, 2016

Location: Singapore

Posted: October 27, 2020 at 6:22 PM / IP Logged

no guides insights?

Back to Top

itolond

Copper - Posts: 87

Joined: February 13, 2016

Location: Singapore

Posted: November 07, 2020 at 3:56 PM / IP Logged

resolved - dodgy earth @ fault

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.