the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Boa 265B Remote Start Not Starting, 2001 Dodge Ram


Post ReplyPost New Topic
< Prev Topic Next Topic >
blackace13 
Member - Posts: 10
Member spacespace
Joined: November 23, 2020
Location: New Jersey, United States
Posted: December 03, 2020 at 4:08 PM / IP Logged Link to Post Post Reply Quote blackace13
Still no luck. I switched the two wires as suggested and also tried what you stated above with starting it with key and pressed the start button on the FOB and it didn’t make a difference.
iskidoo 
Silver - Posts: 1,040
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 08, 2002
Location: Maine, United States
Posted: December 04, 2020 at 2:45 PM / IP Logged Link to Post Post Reply Quote iskidoo
Perhaps you have a faulty antenna. I’m not sure what you could do other than get another unit and start swapping out parts like the antenna or cable or remote.
Steve G
blackace13 
Member - Posts: 10
Member spacespace
Joined: November 23, 2020
Location: New Jersey, United States
Posted: December 04, 2020 at 5:43 PM / IP Logged Link to Post Post Reply Quote blackace13
I’ve thought about that too. Was thinking of picking up an Avital unit and just swapping the whole thing. Like I stated before I checked and triple checked everything and all the voltage through out all the wires and everything is good. I’m just stumped as what it could be.
blackace13 
Member - Posts: 10
Member spacespace
Joined: November 23, 2020
Location: New Jersey, United States
Posted: December 19, 2020 at 2:55 PM / IP Logged Link to Post Post Reply Quote blackace13
iskidoo wrote:
Perhaps you have a faulty antenna. I’m not sure what you could do other than get another unit and start swapping out parts like the antenna or cable or remote.
I picked up another controller, it’s just the unit itself used. I plugged it in and still no luck. So obviously something is wrong with the wiring set up. I still think I’m having an issue with the factory arm/disarm system seems the only logical issue. Like I posted above all voltage is correct and wiring. Luckily I only spent $5 on the controller. Anyone have any ideas???
Page of 2

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, April 23, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer