Avantguard 4, Autostart Not Starting on Low Battery

Home / the12volt's Install Bay / Car Security and Convenience / Avantguard 4, Autostart Not Starting on Low Battery

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

crankycowboy

Member - Posts: 13

Joined: March 08, 2010

Location: Texas, United States

Posted: December 20, 2020 at 2:28 PM / IP Logged

I have an avantguard 4 on an older truck (original owner). I have gotten into cliffnet wizard pro and set the alarm to autostart when the battery gets to a certain voltage. I have calibrated the voltage and it's dead on. For some reason, the truck isn't auto starting when the battery gets low. I only drive the truck about once a week and it keeps going dead. Is there something special I have to do when I arm it so that feature will work?

Thanks!

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.