the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2nd Gen 2011 Toyota Tacoma, Viper 5305V, Alarm Only


Post ReplyPost New Topic
< Prev Topic Next Topic >
Red97LT1 
Copper - Posts: 56
Copper spacespace
Joined: August 07, 2002
Location: United States
Posted: March 14, 2021 at 2:38 PM / IP Logged Link to Post Post Reply Quote Red97LT1
Friend picked up the Viper 5305V and wants me to help him put it in. It's been a while since I've done any audio or alarm installs,so I have a question.
This alarm is capable of Remote Start,which he doesn't want at this time. In the future,that may change. By looking at the diagrams,it has a main plug for the Remote start. I plan on just leaving that Harness disconnected until needed. This won't mess anything up will it? I don't see any other functions that rely on that harness being connected. Thanks
geepherder 
Platinum - Posts: 3,584
Platinum spaceThis member consistently provides reliable informationspace
Joined: October 27, 2003
Posted: March 14, 2021 at 8:48 PM / IP Logged Link to Post Post Reply Quote geepherder
You will want to at least connect the ignition1 (pink) lead on the remote start harness. This is not only an output, but an input also and most importantly will trigger an alarm in case of an unauthorized cycle of the ignition (alarm is armed). It is also required if you need to do any programming without a bitwriter or XKLoader3 and necessary for ignition controlled door locks as well.
My ex once told me I have a perfect face for radio.
Red97LT1 
Copper - Posts: 56
Copper spacespace
Joined: August 07, 2002
Location: United States
Posted: March 15, 2021 at 6:24 AM / IP Logged Link to Post Post Reply Quote Red97LT1
Thanks for the info, I appreciate it.
Red97LT1 
Copper - Posts: 56
Copper spacespace
Joined: August 07, 2002
Location: United States
Posted: March 29, 2021 at 4:32 PM / IP Logged Link to Post Post Reply Quote Red97LT1
Finally getting ready to install.
Red97LT1 
Copper - Posts: 56
Copper spacespace
Joined: August 07, 2002
Location: United States
Posted: March 30, 2021 at 6:00 PM / IP Logged Link to Post Post Reply Quote Red97LT1
Ok,started the install and got most of it connected,even the Pink wire(thanks geepherder). I am the point of connecting the parking lights to the white wire on the brain. The wiring says theres a positive wire and a Negative wire. The alarm can do either. Does it matter as long as I have the jumper set correctly on the brain?
Then I see some that mention to use the wires in the fuse box.
Red97LT1 
Copper - Posts: 56
Copper spacespace
Joined: August 07, 2002
Location: United States
Posted: April 02, 2021 at 10:11 AM / IP Logged Link to Post Post Reply Quote Red97LT1
I am in the process of installing the 5305v and I have all the wires hooked up that I believe I need to. I have everything connected in the 5 pin harness,12v constant,ground,etc. I also have the pink wire in the remote start harness connected to ign 1. Not using remote start.
I've checked power and ground,but the brain doesn't seem to be getting power. When I hit the control button,I don't get any led confirmation. Are there a wire I'm missing that I need to hook up also? Thanks
Red97LT1 
Copper - Posts: 56
Copper spacespace
Joined: August 07, 2002
Location: United States
Posted: April 02, 2021 at 3:17 PM / IP Logged Link to Post Post Reply Quote Red97LT1
Bad fuse. It looked OK, but wasn't.
Red97LT1 
Copper - Posts: 56
Copper spacespace
Joined: August 07, 2002
Location: United States
Posted: April 02, 2021 at 5:16 PM / IP Logged Link to Post Post Reply Quote Red97LT1
Does anybody know what wire I would connect the 2nd unlock output to so I can unlock the drivers door on first press and all the other doors with the second press? Right now,one press unlocks them all.
Would I just disconnect the wire to the unlock wire now and use the 2nd unlock output on that wire?

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, April 12, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer