the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Wiring 2 Momentary Switches, One Motor


Post ReplyPost New Topic
< Prev Topic Next Topic >
patirish 
Member - Posts: 1
Member spacespace
Joined: April 13, 2021
Location: Idaho, United States
Posted: April 13, 2021 at 10:56 PM / IP Logged Link to Post Post Reply Quote patirish
Need to wire 2 momentary switches to 1 Reversing motor, to raise & lower boat motor (Trim). Keep blowing Fuses when wired direct. Was Told I need relays. Can someone please tell me what I need and how to wire them? Thank you
Pm

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, June 18, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer