Remote Start Wiring, 2008 Subaru Outback

Just need the wiring for 2008 subaru outback

Well alright looks like I'm on my own. Not the first time. Lol

OUTBACK     2007-2009 KEY     T-HARNESS     IMMOBILIZER N/A     N/A     SUBARU'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module, See NOTE #1 PART     COLOR     LOCATION     DIAGRAM 12 VOLT CONSTANT     WHITE (+) 50 AMP     @ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 3      STARTER     WHITE/BLACK (+)     @ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 2      STARTER 2     N/A           IGNITION 1     GREEN (+)     @ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 1      IGNITION 2     BLUE (+)     @ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 4      IGNITION 3     N/A           ACCESSORY/HEATER BLOWER 1     YELLOW (+)     @ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 5      ACCESSORY/HEATER BLOWER 2     N/A           KEYSENSE     N/A           PARKING LIGHTS ( - )     BLACK/WHITE (-), NOTE #4     @ LIGHTING SWITCH, (WHITE, 17-PIN PLUG), PIN 14      PARKING LIGHTS ( + )     ORANGE (+)     @ PARKING LIGHT SWITCH, (WHITE, 4-PIN PLUG), PIN 4      POWER LOCK     BROWN/WHITE (-), TYPE B     in DRIVERS KICK PANEL or BIU, (GRAY, 35-PIN PLUG) PIN 15, NOTE #2      POWER UNLOCK     BROWN/BLACK (-), TYPE B     in DRIVERS KICK PANEL or BIU, (GRAY, 35-PIN PLUG) PIN 29, NOTE #2      LOCK MOTOR WIRE     LT. GREEN/YELLOW (+) 5-Wire Type     in DRIVERS KICK PANEL or BIU, (GRAY, 35-PIN PLUG) PIN 7, NOTE #2      DOOR TRIGGER     BLUE/WHITE (-)     in DRIVERS KICK PANEL or BIU, (GRAY, 35-PIN PLUG) PIN 19, NOTE #2      DOMELIGHT SUPERVISION     BROWN (-)     in PASSENGER A Pillar or BIU, (WHITE, 30-PIN PLUG) PIN 3, NOTE #2      TRUNK RELEASE     Use TRUNK RELEASE Motor           SLIDING POWER DOOR     N/A           HORN     BROWN to RED/WHITE (-)     @ HORN SWITCH or BIU, (WHITE, 30-PIN PLUG) PIN 11, NOTE #2      TACH     Any wire NOT BLUE/BLACK, RED or YELLOW/BLUE (AC)     @ Any FUEL-INJECTOR      WAIT TO START LIGHT     N/A           BRAKE     BROWN/WHITE to BROWN (+)     @ BRAKE PEDAL SWITCH or BIU, (WHITE, 28-PIN PLUG) PIN 23, NOTE #2      FACTORY ALARM DISARM     YELLOW/RED (-), NOTE #3     in DRIVERS KICK PANEL or BIU, (GRAY, 35-PIN PLUG) PIN 12, NOTE #2      ANTI-THEFT     SUBARU'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module, See NOTE #1     @ IGNITION SWITCH TUMBLER      NOTES NOTE #1: SUBARU'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module, Part # 791 Bypass Module (for REMOTE STARTING ONLY!) Part # DLPK-CANBUS MULTI (for REMOTE START/DOOR LOCKS) NOTE #2: the BIU, (Body Integrated Unit) is located under the DRIVERS DASH, and to the RIGHT of the STEERING COLUMN. NOTE #3: TEST this wire while Turning the KEY in the Drivers Door. NOTE #4: this wire only Functions with the Ignition Key "ON"~wirewise~ Verify all wiring with your meter before making any connections!